Jiangsu ZRD Bearing Co., Ltd.
Jiangsu ZRD Bearing Co., Ltd.
Add to Cart
Manufacturing Standard
|
Precision Rating |
ABEC-1(p0) ABEC-3(p6) ABEC-5(p5) ABEC-7(p4) |
|
Seals Type |
Open, Z,ZZ,RS,2RS |
|
Material |
Bearing steel,carbonsteel,stainless steel,ceramic |
|
Bearing steel standard |
GCr15,SUJ2,100Cr6 |
|
Vibration Level Code |
V,V1,V2.V3 |
|
Radial Play(Clearance) |
C0,C2,C3,C4,C5 |
|
Noise Level |
Z1,Z2,Z3,Z4 |
|
Service support |
customization,OEM |
Introduction
The self-aligning ball bearing was invented by SK. This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. It has two rows of balls and a common sphered raceway in the outer ring. Self-aligning ball bearings are available with either a cylindrical or tapered bore. And it has the lowest friction of all rolling bearings, which enables it to run cooler even at high speeds.
Application
Self-aligning ball bearings are used for commercial ground shafting applications:
Mining machinery
power machinery
heavy machinery
textile machinery
| Principal dimensions | Basic load ratings | Speed ratings | Designation | ||||
|---|---|---|---|---|---|---|---|
| dynamic | static | Reference speed | Limiting speed | ||||
| d | D | B | C | C0 | |||
| mm | kN | r/min | - | ||||
| 55 | 100 | 25 | 27,6 | 10,6 | - | 4300 | 2211 E-2RS1KTN9 |
Open, basic design, bearings Sealed, with contact seals on both sides open bearings with an extended inner ring